Offer
Agricultural and construction machinery
PRODUCT LINE
Viscosity
MULTI
ORLEN OIL MULTI UTTO 10W-30
Quality
API: GL-4
Viscosity
SAE 10W-30
Meets requirements
John Deere JDM J20C; John Deere JDM J20D; Massey Ferguson CMS M1135, M1141, M1143, M1145; Allison C4; AGCO Powerfluid 821XL; Ford ESN M2C86-B/C, M2C134-D; Case New Holland MAT 3540, 3525, 3509, 3505; Case MS 1210; FNHA-2-C-200.00, FNHA-2-C-201.00; Volvo CE WB 101; Caterpillar TO-2; Valtra G2-08; Valtra G2-B10 Same; Landini; Deutz-Fahr; Claas (oprócz przekładni Renault); Fendt (oprócz przekładni Vario); Komatsu; Kubota UDT; ZF TE-ML 03E, 05F, 06K, 17E, 21F; Parker Denison UTTO/THF (testy na pompach T6H20C, T5D, P46); Vickers 35VQ25
Universal, new generation, multipurpose, and high quality UTTO oil (Universal Tractor Transmission Oil).
With modern, advanced, and unique composition of specially selected mineral bases and enriching additives, the oil meets the most recent operational
requirements set up for the manufacturers of agricultural construction and industrial equipment. It stands out due to its excellent lubricating, anti-wear and anticorrosive properties, required during the intensive exploitation of modern gears and hydraulic systems. It offers very good compatibility with a broad variety of sealing materials, oxidation resistance, and excellent lowtemperature properties, while perfectly damping the system vibrations. High viscosity index provides a very good viscosity and temperature characteristics.
Multi UTTO is designed for the lubrication of different types of gears used in agricultural equipment, construction and manufacturing machinery (gearboxes, final drives, steering gears, differentials) and high-loaded hydraulic systems, while keeping up to the recommendations of manufacturers of machinery and vehicles. It can be used in tractors in which the manual transmission, axles, hydraulic fittings, and ""wet brakes"" are lubricated by single lubrication system. It should not be used in the automatic transmissions and engines in passenger vehicles
MULTI
ORLEN OIL MULTI STOU 10W-40
Quality
API: CG-4; API: GL-4; ACEA: E3
Viscosity
SAE 10W-40
Meets requirements
Massey Ferguson M1145; Massey Ferguson M1144; Massey Ferguson M1139; Ford M2C 159B; Ford M2C 159C; John Deere JDM J27; New Holland 82009201; New Holland 82009202; New Holland 82009203; ZF TE –ML 06A; ZF TE –ML 06B; ZF TE –ML 06C; ZF TE –ML 07B; CCMS D4; Sperry Vickers/Eaton: M2950S; Sperry Vickers/Eaton: I-286-S; Sauer Sunstrand/Danfoss: Hydrostatic Trans Fluid; AFNOR NFE68603E
Multi STOU 10W-40 is a high-quality synthetic oil of the Super Tractor Oil Universal type.
It is characterised by a very high level of protection for engines working in difficult conditions. Thanks to its carefully chosen formulation it provides excellent lubrication for all kinds of manual transmissions.
Multi STOU 10W-40 is a universal oil which can be used in machine engines, manual gearboxes. It can be successfully used in hydraulic systems and wet brakes.
MULTI
ORLEN OIL MULTI PTF 10W
Viscosity
SAE 10W
Meets requirements
Komatsu Dresser HMS B21-0006; Komatsu Micro-Clutch; Caterpillar TO-4; Alison C-4; Komatsu KES 07.868.1
Singlegrade semisynthetic hydraulic-gear oil PTF (Power Transmission Fluid) 10W meets severe requirements of Caterpillar TO-4.
It is characterized by very good anti-wear properities, maximize reduces wear of transmission parts, provides a quieter working
brakes, shows very good compatibility with sealing materials, layout and very good resistance to oxidation. High viscosity index provides a very good viscosity-temperature characteristics. The use of synthetic base, specially selected additives with
antioxidative and anticorrosion properties and which improve lubricating properties and resistance to foaming oil provides a long lifetime of transmissions and brakes.
ORLEN OIL Multi PTF 10W TDTO (Transmission and Drive Train Oil) is designed for work in severe conditions in the U.S production of gearboxes, powershift transmission, transmission systems and hydraulic systems of hard construction equipment, tractors and loaders. Because of very good low-temperature properities this oil can be used in low ambient temperatures during the winter. It must not be applied as engine oils.
MULTI
ORLEN OIL MULTI PTF 30
Viscosity
SAE 30
Meets requirements
Komatsu Dresser HMS B21-0006; Komatsu Micro-Clutch; Caterpillar TO-4; Alison C-4; Komatsu KES 07.868.1
Singlegrade mineral hydraulic-gear oil PTF (Power Transmission Fluid) 30 meets severe requirements of Caterpillar TO-4.
It is characterized by very good anti-wear properities, maximize reduces wear of transmission parts, provides a quieter working
brakes, shows very good compatibility with sealing materials, layout and very good resistance to oxidation. The use of specially selected additives with antioxidative and anticorrosion properties and which improve lubricating properties and resistance to foaming oil provides a long lifetime of transmissions and brakes.
ORLEN OIL Multi PTF 30 TDTO (Transmission and Drive Train Oil) is designed for work in severe conditions in the U.S. production of gearboxes, powershift transmission, transmission systems and hydraulic systems of hard construction equipment, tractors and loaders. The oil is used in the summer. It must not be applied as engine oils.
MULTI
ORLEN OIL MULTI PTF M 10W
Viscosity
SAE 10W
Meets requirements
Komatsu KES 07.868.1; Caterpillar TO-4; Alison C-4; ZF TE-ML-03C
Single-grade gear and hydraulic heavy-duty PTF oil, for use in gear boxes, Powershift transmissions, power transmission systems and hydraulic systems of heavy construction machinery, tractors and loaders.
MULTI
ORLEN OIL MULTI PTF 50
Viscosity
SAE 50
Meets requirements
Komatsu Dresser HMS B21-0006, Komatsu Micro-Clutch, Komatsu KES 07.868.1
ORLEN OIL MULTI PTF 50 is a gear and hydraulic oil produced on the basis of a specially selected package of enriching additives with antioxidant, anticorrosive effect, improving lubricating properties and resistance to foaming.
ORLEN OIL MULTI PTF 50 gear-hydraulic oil is designed for heavy-duty operation in gearboxes, power transmission systems and hydraulic systems of heavy construction equipment, tractors and loaders of American production. The oil is used in the summer. It cannot be used as an engine oil.
COOLANT
ORLEN OIL Coolant HEAVY concentrate
Approvals
MAN 324 Typ Si-OAT, Daimler Truck Fluid Release 29D120 (Mercedes Benz 326.5)
Meets requirements
MB-Approval 326.6, VW/Audi/Seat/Skoda TL 774-G (G12++), Cummins CES 14603, DEUTZ DQC CC-14, PN-C-40007:2000, ASTM D3306, ASTM D4985, BS 6580, ÖNORM V 5123, SAE J1034.
PETRYGO antifreeze concentrates are a comprehensive line of products, depending on the type of production technology used, suitable for use in the cooling systems of any car engine, both in modern engines, made mainly of aluminum, and in older types of engines. They are produced based on high-quality ethylene glycol.
They provide full protection for the engine and cooling systems. Thanks to the possibility of any dilution with water, they allow the crystallization temperature to be selected according to the desired requirement. Optimized technology guarantees high fluid stability during long-term storage and use.
COOLANT
ORLEN OIL Coolant HEAVY
Approvals
MAN 324 Typ Si-OAT, Daimler Truck Fluid Release 29D120 (Mercedes Benz 326.5)
Meets requirements
MB-Approval 326.6, VW/Audi/Seat/Skoda TL 774-G (G12++), Cummins CES 14603, DEUTZ DQC CC-14, PN-C-40007:2000, ASTM D3306, ASTM D4985, BS 6580, ÖNORM V 5123, SAE J1034.
Antifreeze: full system protection: 500 000 km or 5 years.
For diesel engines in light trucks, trucks, buses, agricultural machines and heavy construction machines; effective in vehicles equipped with aluminium or cats-iron radiators and mixed systems; mixable with other radiator coolants meeting equivalent parameters.
GEAR
ORLEN OIL GEAR SV 75W-80
Quality
API: GL-4
Viscosity
SAE 75W-80
Meets requirements
Mercedes-Benz 235.5; ZF TE-ML 02B, 08, 17A; MAN 341 Z2; DAF; Iveco; Eaton
Gear SV 75W-80 is a high quality synthetic gear oil. Application of the most modern Extreme Pressure additives provides the ability to carry heavy loads. Highest quality synthetic base oil guarantees excellent lubricating properties during the entire operation.
Gear SV 75W-80 is dedicated for use gearboxes, transmissions and axles, in cars, trucks and heavy construction machinery.
Guarantees:
• stability of the lubricating properties during operation,
• Excellent lubricating and anti-wear properties,
• The ability to carry heavy loads.
GEAR
ORLEN OIL GEAR SX 75W-90
Quality
API: GL-5
Viscosity
SAE 75W-90
Meets requirements
ZF TE-ML 07A, 16B, 17B, 19B, 21A; NATO O-226
Gear SX 75W-90 is a high-quality synthetic gear oil for lorries as well as for construction and farming machinery. Owing to its synthetic base oils, it provides consistent performance and protection for power trains throughout their entire lifetime.
Gear SX 75W-90 oil is intended for use mainly in final gears and rear drive axles.
It guarantees:
• consistent lubrication properties during use
• good load bearing capacity
• excellent lubrication and anti-wear properties
GEAR
ORLEN OIL GEAR GL-4 80W
Quality
API: GL-4
Viscosity
SAE 80W
Approvals
DTFR 13B100 (235.1); ZF TE-ML 17A (ZF011353)
Meets requirements
MAN 341 Type Z2; MAN 341 Type E1
Gear GL-4 80W is a high quality gear oil based on deep refined mineral oils. It is featured by excellent lubricating properties, high resistance to oxidation and high ability to transfer loads. Gear GL-4 80W guarantees very good antiwear properties and it is a perfect protection against rust and corrosion.
Gear GL-4 80W is intended to lubricate manual gear boxes and other gears of vehicles operating in difficult conditions i.e. high speed and low torque or low speed and high torque. It is also recommended for all machines and devices, manufacturer of which recommends API GL-4 gear oil.
Gear GL-4 80W was included on the list of oils ZF TE-ML 17A.
GEAR
ORLEN OIL GEAR GL-4 80W-90
Quality
API: GL-4
Viscosity
SAE 80W-90
Approvals
ZF TE-ML 16A, 17A, 19A (ZF011320)
Meets requirements
Mercedes Benz 235.1; MAN 341 Type Z2; MAN 341 Type E1
Gear GL-4 80W-90 is a high quality gear oil based on deep refined mineral oils. It is featured by excellent lubricating properties, high resistance to oxidation and high ability to transfer loads. Gear GL-4 80W-90 guarantees very good antiwear properties and it is a perfect protection against rust and corrosion.
Gear GL-4 80W-90 is intended to lubricate manual gear boxes and other gears of vehicles operating in difficult conditions i.e. high speed and low torque or low speed and high torque. It is also recommended for all machines and devices, manufacturer of which recommends API GL-4 gear oil.
GEAR
ORLEN OIL GEAR GL-5 80W-90
Quality
API: GL-5
Viscosity
SAE 80W-90
Approvals
ZF TE-ML 16B, 17B, 19B, 21A (ZF011288); ZETOR (Proxima, Forterra)
Meets requirements
Mercedes Benz 235.0; MAN 342 typ M1; MIL-L-2105D; Renault; Voith 3.325-339; Volvo 97310; Volvo 97316; ZF TE-ML 07A; DAF; Tatra TDS 80/32
Gear GL-5 80W-90 is a high quality gear oil based on deep refined mineral oils. It is featured by excellent lubricating properties, high resistance to oxidation and high ability to transfer loads. Gear GL-5 80W-90 guarantees very good antiwear properties and it is a perfect protection against rust and corrosion.
Gear GL-5 80W-90 is intended to lubricate manual gear boxes and other gears of vehicles operating in difficult conditions i.e. high speed and low torque or low speed and high torque. It is also recommended for all machines and devices, manufacturer of which recommends API GL-5 gear oil.
GEAR
ORLEN OIL GEAR LS 80W-90
Quality
API: GL-5
Viscosity
SAE 80W-90
Approvals
ZF TE-ML 05C, 21C (ZF011287)
Meets requirements
MIL-L-2105D; MAN 342 M-1; Mercedes-Benz 235.0; Voith 3.325-339; Volvo 97310; Volvo 97316; Renault, ZF TE-ML 07A, 08, 16B, 17B, 19B, 21A; DAF
New generation multi-grade gear oil. Designed on the basis of an excellent composition of deeply refined, mineral base oils with
the package of highest quality enriching additives. Provides optimum lubrication and maximum protection for manual
transmissions, but also limited slip gears - LS.
ORLEN OIL Gear LS 80W-90 is a high-quality, multi-grade gear oil, designed to be used in mechanical transmissions in passenger
cars, trucks, and buses operating in difficult conditions, where it is required to use oil meeting the requirements of API GL-5 API.
Suitable for use in heavily loaded vehicles, construction site vehicles, and other mechanical/motor devices equipped with limited
slip gears, so called LS - Limited Slip.
Due to its high load-transferring capacity, the oil is recommended for driving axles in vehicle, for which the manufacturer
recommends the use of API GL-5 gear oil.
It guarantees:
• perfect thermal and oxidative stability
• good corrosion and anti-rust protection,
• high loading transfer capacity
• perfect lubricating and anti-wear qualities,
• very good antifoaming parameters.
GEAR
ORLEN OIL GEAR LL 80W-90
Quality
API: GL-5/GL-4, MT-1
Viscosity
SAE 80W-90
Approvals
ZF TE-ML TE-ML 02B, 05A, 12L, 12M, 16B, 17H, 19B, 21A; MAN 342 Typ M2; MAN 341 Typ Z2
Meets requirements
MIL-PRF-2105E; Mercedes-Benz 235.0; SCANIA STO 1:0; RENAULT; MACK GO-J; ZF TE-ML 07A, 08; ArvinMeritor; DAF; IVECO
Mineral, multi-grade, top-quality gear oil with extended service life. Designed for use in manual transmissions and drive axles in
motor vehicles. Perfect and careful selection of enriching additives provides excellent working of all drives, easy gear change, and
high oil stability.
ORLEN OIL Gear LL 80W-90 is an excellent gear oil for year-round operation in both passenger cars, vans, trucks and other utility motor
vehicles operating in extreme conditions, i.e. at high stroke loads and high speeds, and also at high temperatures.
Recommended for manual, both synchronized and non-synchronized transmissions and driving axles of motor vehicles. Can be
successfully used in automatic transmissions in heavily loaded vehicles and buses, as well as in a wide range of other
equipment/machinery, where the requirements of API GL-5 or GL-4 class have to be met. Recommended especially for driving
axles of such manufacturers such as Renault, DAF, Iveco, and many others.
Meets the requirements of API MT-1 classification concerning oils for non-synchronized manual transmissions.
It guarantees:
• High mileages, up to 160 thousand,
• Perfect thermal and oxidative stability
• High gear cleanness,
• Protection against rust and corrosion,
• High loading transfer capacity
• Perfect lubricating and anti-wear qualities.
GEAR
ORLEN OIL GEAR GL-5 85W-90
Quality
API: GL-5
Viscosity
SAE 85W-90
Meets requirements
MAN 342 Type M1; Mercedes Benz 235.0; MIL-L-2105D; Renault; Voith 3.325-339; Volvo 97310; Volvo 97316; ZF TE-ML 07A, 16B, 17B, 19B, 21A; DAF
Vehicle gear mineral oil with very good lubricating and anticorrosive properties, high resistance to oxidation and high ability to
transfer loads.
Gear GL-5 85W-90 is recommended to lubricate rear axles and gears of vehicles operating in difficult conditions i.e.
• high speed and low torque,
• low speed and high torque,
• and for those machines and devices, manufacturer of which recommends API GL-5 gear oil.
GEAR
ORLEN OIL GEAR LX 85W-140
Quality
API: GL-5
Viscosity
SAE 85W-140
Meets requirements
ZF TE-ML 05A, 07A, 08, 12E, 16C, 16D, 17B, 19B, 21A; Scania STO 1:0; Volvo 1273.10
ORLEN OIL Gear LX 85W-140 is a high-performance gear oil designed for trucks, construction and agricultural machines. Due to
the good oxidation resistance and carrying high loaded capacity provides protection of transmission elements during the entire
operation.
ORLEN OIL Gear LX 85W-140 is intended for use primarily in final drives and rear axles.
Guarantees:
• stability of the lubricating properties during operation
• High load carrying capacity,
• Excellent lubricity and anti-wear properties.
GEAR
ORLEN OIL GEAR ATF VI
Quality
Dexron VI
Meets requirements
GM DEXRON VI; BMW ATF 6; Chrysler/Dodge/Jeep 68157995AA; Ford MERCON® LV (FF-WSS-M2C-938A/SF, XT-10 QLV); Ford WSS M2C 922A1, 924A (XT-8-QAW) JWS 3309; Honda DW-1; Honda Type 3.1 : 08263-999-01HE (EU), 08200-9017 (USA) (ZF LifeguardFluid 9) (ZF No. AA01.500.001); Hyundai/Kia SP-IV M (SP4-M); JASO M315-2013 2A; Mazda ATF M-III, M-V, FZ; Nissan Matic Fluid D, J, S; Suzuki AT OIL 5D06, ATF 2384K; Toyota ATF T-III, T-IV, WS; Volvo PN, 1161540/1161640; VW G055 540 (A2); VW G 055 162-A2, -A6 (ZF LifeguardFluid 6 Plus); VW G 060 162 (ZF LifeguardFluid 8); ZF 6, 8, 9 speed transmissions
A technologically advanced synthetic gear oil produced from high-quality base oils and a package of additives. It
guarantees trouble-free operation of the most demanding automatic transmissions in all operating conditions. Provides
maximum protection and best shifting smoothness over a long period of time. Meets the requirements of automatic
transmissions requiring the latest ATF specifications.
ORLEN OIL GEAR ATF VI designed for automatic transmissions in various types of vehicles. Do not use in transmissions where
DCT or CVT oils are recommended.
It provides:
- consistent, smooth shifting in all conditions regardless of the season and protection of transmission components, which
contributes to prolonging its operational life and ensuring driving comfort
- excellent temperature stability to counteract the effects of oxidation
- low viscosity for reduced fuel consumption
- recommended for use in most automatic transmissions
GEAR
ORLEN OIL GEAR ATF III
Quality
Dexron III H, Dexron IIIG
Approvals
DTFR 13C170 ( 236.9 ); MAN M339 typ V1; MAN M339 typ Z1; Volvo 97341; ZF TE-ML 04D, 14A
Meets requirements
Voith H55.6335.xx; ZF TE-ML 03D; Volvo 97340 (Volvo Std 1273.40); Allison C4; Ford Mercon
GEAR ATF III is manufactured with special semisynthetic technology supported by a set of enriching additives with antioxidative and anticorrosive properties and ones improving lubricating properties as well as resistance to foaming.
GEAR ATF III is intended for automatic gears of cars, trucks and buses, manufacturer of which recommends application of Dexron® III oils. GEAR ATF III is also recommended for power steering devices, hydraulic clutches of cars and trucks and for ATF requiring hydraulic systems. It can also be used in Powershift gears in tractors and loaders where the manufacturer recommends the use of ATF oil.
ORLEN OIL
ORLEN OIL HIPOL SEMISYNTETIC GL-5 75W-90
Quality
API: GL-5
Viscosity
SAE 75W-90
General features
Universal, semisynthetic oil for vehicle gears.
Multiseasonal semisynthetic oil intended for gears, in particular for hypoid gears of cars, trucks, buses and of other vehicles,
machines and devices operating in very difficult conditions, where manufacturer recommends API GL-5 oils.
ORLEN OIL
ORLEN OIL HIPOL SEMISYNTETIC GL-4 75W-90
Quality
API: GL-4
Viscosity
SAE 75W-90
ORLEN OIL Hipol SEMISYNTHETIC GL-4 SAE 75W-90 semi-synthetic gear oil is intended for use in hypoid gears, in cars, trucks
and other vehicles operating in very difficult conditions, i.e. at high speeds and step loads, at high speeds and low torque or at
low speeds and high torque, if the manufacturer allows the use of GL-4 oil.
• it ensures perfect cleanliness transmissions,
• it enables easy start-up at low temperatures,
• it prevents the formation of deposits,
• it reduces the wear of transmission components,
ORLEN OIL
ORLEN OIL HIPOL GL-4 80W-90
Quality
API: GL-4
Viscosity
SAE 80W-90
Vehicle gear mineral oil with very good lubricating and anticorrosive properties, high resistance to oxidation and high ability to
transfer loads.
It is intended to lubricate gears of vehicles, in particular gearboxes and final drives of cars, trucks and earth works machines
operating in difficult conditions i.e.:
· high speed and low torque,
· low speed and high torque,
· and for those machines and devices, manufacturer of which recommends API GL-4 gear oil.
ORLEN OIL
ORLEN OIL HIPOL GL-5 80W-90
Quality
API: GL-5
Viscosity
SAE 80W-90
Vehicle gear mineral oil with very good lubricating, antioxidative, anticorrosive and antifoaming properties.
Mineral oil intended to lubricate gears of vehicles operating in very difficult conditions, especially for gearboxes and final drives,
where API GL-5 oil is recommended, it is featured by perfect properties guaranteeing maximal protection against mechanical
wear out.
ORLEN OIL
ORLEN OIL HIPOL MF 80W-90
Quality
API: GL-3
Viscosity
SAE 80W-90
Vehicle gear mineral, muliseasonal oil with very good lubricating, antifoaming, anticorrosive, antioxidative as well as cleaning and
dispersing properties.
Oil for lubricating of gears of vehicles operating with moderate loads, especially in low-capacity cars, recommended for lubrication
of gearboxes and power transmission systems of polish Fiat 126p.
ORLEN OIL
ORLEN OIL HIPOL GL-4 85W-140
Quality
API: GL-4
Viscosity
SAE 85W-140
Vehicle gear mineral oil with very good lubricating and anticorrosive properties, high resistance to oxidation and high ability to
transfer loads.
It is intended to lubricate gears of vehicles, in particular gearboxes and final drives of cars, trucks and earth works machines
operating in difficult conditions i.e.:
· high speed and low torque,
· low speed and high torque,
· and for those machines and devices, manufacturer of which recommends API GL-4 gear oil.
ORLEN OIL
ORLEN OIL HIPOL GL-5 85W-140
Quality
API: GL-5
Viscosity
SAE 85W-140
Vehicle gear mineral oil with very good lubricating, antioxidative, anticorrosive and antifoaming properties. Mineral, multiseasonal oil intended for lubrication of gears and rear axles of mechanical devices – cars, trucks, buses, building equipment, farming machines – operating in very difficult conditions for which API GL-5 oil is recommended.
ORLEN OIL
ORLEN OIL HIPOL 6
Quality
API: GL-4
Viscosity
SAE 80W
Approvals
ZETOR Proxima, Proxima Plus, Forterra
ORLEN OIL Hipol 6 vehicle gear oil is manufactured from highly refined mineral base oils containing additives improving lubricating properties and a set of high quality enriching additives with antioxidative and anticorrosive properties as well as additives improving resistance to foaming.
ORLEN OIL Hipol 6 is intended to lubricate farm tractors gears in both summer and winter, it should be applied as directed by the farm tractor user manual. The oil may also be applied for hydraulic systems of farm tractors and auxiliary equipment e.g. front-end loaders, dump trailers, etc.
ORLEN OIL
ORLEN OIL HIPOL 10F
Quality
API: GL-5
Viscosity
SAE 80W
Vehicle gear mineral oil with very good lubricating and anticorrosive properties, high resistance to oxidation and high ability to transfer loads. High quality mineral oil intended for gears of vehicles operating in very difficult conditions, especially for hypoid gears
ORLEN OIL
ORLEN OIL HIPOL 15F
Quality
API: GL-5
Viscosity
SAE 85W-90
Vehicle gear mineral oil with very good lubricating, antioxidative, anticorrosive and antifoaming properties.It is intended to lubricate rear axles and gears of vehicles operating in difficult conditions i.e.
• high speed and low torque,
• low speed and high torque,
and for those machines and devices, manufacturer of which recommends API GL-5 gear oil.
AGRO
ORLEN OIL AGRO SUPREME 10W-40
Quality
API: CI-4; ACEA: E4, E7
Viscosity
SAE 10W-40
Approvals
DTFR 15B120 (228.5); Man M3277; Volvo VDS-3; Mack EO-N; Renault VI RLD-2
Meets requirements
Deutz DQC-III-18; MTU Type 2; MTU Type 3; Man 3275; Volvo VDS 2; Cummins CES 20078
Semisynthetic multi-grade UHPDO engine oil designed for naturally aspirated and turbo-charged diesel engines.
It is recommended for tractors and agricultural machinery operated in extreme conditions.
Guarantee:
• longer oil change intervals;
• maximised engine output in extreme conditions;
• improved fuel management;
• prevention from sooth deposits.
ORLEN OIL Agro Supreme 10W-40 is a multi-grade engine oil intended for lubrication of naturally aspirated and turbo-charged
diesel engines. Recommended for use in tractors, combines and other agricultural machinery with this viscosity and quality grade specified by manufacturers. It ensures effective engine lubrication event at continuous reverse operation mode. It is suitable for engines meeting the emission standards. It is a good choice for agricultural machinery engines operated on farms with large crop areas under extreme load and machinery used on small and large farms, as well as for municipal works and landscape maintenance.
It can be used in vehicles meeting EPA Tier 2 and EPA Tier 1, if all requirements of the vehicle manufacturer for quality andviscosity grades are met.
ORLEN OIL
ORLEN OIL HIPOL ATF II D
Quality
GM Dexron II D
Approvals
MAN 339 Typ Z1; MAN 339 Typ V1; MAN 339 Typ L2; ZF TE-ML 04D, 11A, 14A; Voith H55.6335xx (G 607)
Meets requirements
GM Dexron II D, Allison C-4.
ORLEN OIL HIPOL ATF II D is a mineral oil for automatic gears of vehicles.High quality, mineral ORLEN OIL HIPOL ATF II D oil is intended for application in automatic gears of cars, trucks and buses, manufacturer of
which recommends application of Dexron® II D oils.
ORLEN OIL HIPOL ATF II D is also recommended for power steering devices, hydraulic clutches of cars and trucks and for ATF requiring
hydraulic systems.
ORLEN OIL
ORLEN OIL HIPOL ATF II E
Quality
GM Dexron II E
Approvals
DTFR 13C170 (236.9); MAN 339 Typ Z2; MAN 339 Typ V2; ZF TE-ML 03C, 04D,14B, 17C, 20B, 25B; Voith H55.6336.xx
Meets requirements
ZF TE-ML 14C, 16L, 16R, Allison C-4;
ORLEN OIL HIPOL ATF II E is a fully synthetic oil for automatic gears of vehicles. ORLEN OIL HIPOL ATF II E is intended for automatic gears of cars, trucks and buses, manufacturer of which recommends application of
Dexron® II E oils.
ORLEN OIL HIPOL ATF II E is also recommended for power steering devices, hydraulic clutches of cars and trucks and for
ATF requiring hydraulic systems.
ORLEN OIL
ORLEN OIL HIPOL TRANS 90H
Quality
API: GL-5
ORLEN OIL HIPOL TRANS 90H is a mineral gear oil based on high-quality base oils, containing additives improving lubricating
properties and a package of high-quality enriching additives with antioxidant, anticorrosive and anti-foaming properties.
ORLEN OIL HIPOL TRANS 90H is intended for lubrication of motor vehicle transmissions, especially gearboxes and final drives
of passenger cars, trucks and earth-moving machinery operating in difficult operating conditions.
AGRO
ORLEN OIL AGRO NOVO 15W-40
Quality
API: CK-4/SN; ACEA: E9, E11, E7
Viscosity
SAE 15W-40
Approvals
DTFR 15C100 (228.31); Volvo VDS-4; Renault RVI RLD-3; Mack EO-S 4.5; This product meets Cummins Eng. Std. CES20086
Meets requirements
Deutz DQC III- 18LA; Man M 3775; Man M 3575; MTU Type 2.1; Caterpillar ECF-3; Detroit Diesel 93K222; Ford WSS-M2C171-F1; Allison TES 439; Jaso DH-2
Top quality multi-grade engine oil developed for agriculture. The modern Mid-SAPS technology places it in the SHPD (Super High Performance Diesel) category of oil. It is intended for lubrication of engines of a broad range of agricultural machinery.
Guarantee:
• excellent engine performance in all operating conditions;
• excellent viscosity and temperature performance;
• reduced content of sulphur, phosphor and sulphate ash (Mid SAPS) for excellent protection and longer life of diesel
particulate filters and other flue gas aftertreatment solutions (EGR, SCR NOx);
• effective lubrication of friction pairs while starting cold engine and operating at low temperatures;
• effective wear control of piston and cylinder bearing surface;
• no impact on engine sealing.
ORLEN OIL Agro NOVO 15W-40 is engine oil recommended for a broad range of agricultural machinery, including tractors, combines and other machines with this viscosity and quality grade specified by manufacturers. The oil is intended for heavy duty diesel engines operated in fields and in extreme load conditions. Suitable for use in engines meeting emission standards. It is suitable for use at any season of the year, in agricultural machinery operated on small and large farms, in municipal works and landscape maintenance. Provides excellent lubrication while starting engines in low temperatures (freezing).
AGRO
ORLEN OIL AGRO NEXT 15W-40
Quality
API: CI-4/CH-4/CG-4; ACEA: E7, E5, E3
Viscosity
SAE 15W-40
Approvals
Volvo VDS-3; Mack EO-N; Renault RLD/RLD-2
Meets requirements
Mercedes-Benz 228.3; Cummins CES 20076/77/78; MTU TYPE 2; Deutz DQC-III-10; Man M3275-1; Caterpillar ECF-2, ECF-1a
Mineral quality oil for diesel engines operated in various agricultural machinery. Excellent for heavy duty operation of diesel engines.
Quality base oil combined with proper selection of enriching additives guarantee effective engine lubrication in any operating conditions.
Guarantee:
• no impact on engine sealing;
• high resistance to foaming, ensuring continuous lubricating film even in extreme operating conditions;
• effective neutralisation of acidic combustion products for improved corrosion protection of engine components;
• reduced oil loss during operation and consistent oil quality in high temperatures;
• high shear resistance at high temperatures and load guarantees that the lubrication properties are preserved over the entire
period between oil exchanges.
ORLEN OIL Agro NEXT 15W-40 is intended for diesel engines in agricultural machinery. It is suitable not only for tractor engines, but also for a broad range of harvesters (for corn, potato, beet etc.) and large agricultural machines with this viscosity and quality
grade specified by manufacturers. It is a perfect choice for severe operating conditions in various field works in farms with large and small crop areas. ORLEN OIL Agro NEXT 15W-40 guarantees effective engine lubrication during high-speed ploughing and deep cultivation. It ensures easy cold start and good pumpability during spring and autumn frosts.
AGRO
ORLEN OIL AGRO BASIC 15W-40
Quality
API: CH-4/CG-4; ACEA: E7, E5
Viscosity
SAE 15W-40
Approvals
DTFR 15B110 (228.3); Deutz DQC-III-10; Volvo VDS-3; Mack EO-N; Renault VI RLD-2
Meets requirements
MTU TYPE 2; Volvo VDS-2; Man M3275-1; Caterpillar ECF-1a; Iveco
Mineral multigrade oil for diesel engines. Oil developed for agriculture, dedicated to tractors and other machinery for work in field.
Quality base oils combined with an excellent choice of enriching additives guarantee effective engine lubrication.
Guarantee:
• excellent engine performance in all operating conditions;
• engine cleanliness by keeping contaminants in suspension;
• longer oil change intervals;
• maximised engine output in extreme conditions.
ORLEN OIL Agro Basic 15W-40 is engine oil recommended for heavy-duty diesel engines operated in Spring, Summer and Autumn. Suitable for engines conforming to Euro V, IV and lower standards. Recommended for use in tractors, combines and other agricultural machinery with this viscosity and quality grade specified by manufacturers.
AGRO
ORLEN OIL AGRO HV 46
Quality
ISO VG 46 ; ISO 11158-HV
Meets requirements
DIN 51524 CZ.3.
Hydraulic oil for heavy duty drive systems, high-pressure piston pumps and hydraulic systems in agricultural machines and devices.
Guarantees: longer utilization period, decreased wear of grinding elements in hydraulic pump systems, operation within a wide range of temperatures whilst maintaining optimal viscosity properties.
AGRO
ORLEN OIL AGRO LS 80W-90
Quality
API: GL-5
Viscosity
SAE 80W-90
Approvals
ZF TE-ML 05C, 21C
Meets requirements
MIL-L-2105D; Man 342 M-1; Mercedes -Benz 235.0; Voith 3.325-339; Volvo 97310; Volvo 97316; Renault;ZF TE-ML 07A, 08, 16B, 17B, 19B, 21A; DAF
Mineral high quality transmission oil for all-year use in transmission of tractors, harvesters and other agricultural machinery.
Recommended in particular for Limited Slip differentials.
Guarantee:
• high load bearing ability;
• excellent lubricating and anti-wear properties;
• outstanding anti-foaming performance;
• excellent thermal and oxidation stability.
ORLEN OIL Agro LS 80W-90 multigrade transmission oil is recommended for lubrication of manual transmissions of various agricultural equipment operated in severe conditions. It is recommended for use in tractors, combines and other agricultural machinery with this viscosity and quality grade specified by manufacturers. It is recommended particularly for use in heavy-duty vehicles, agricultural equipment and other machinery with for Limited Slip
differentials.
AGRO
TURDUS SHPD 15W-40
Quality
API: CI-4; ACEA: E5
Viscosity
SAE 15W-40
Approvals
DTFR 15B110 (228.3); Deutz DQC III-18; MTU Oil Category 2; Volvo VDS-3; Mack EO-N; Renault VI RLD-2
Meets requirements
Man M3275-1; Caterpillar ECF-2
Turdus SHPD 15W-40 is compatible with engines that meet EURO 3 and previous emission standards. Guarantees high level of effectiveness of the power unit (by preventing residua and carbon fouling production as well as preventing wear and tear of lubricated elements).
Conventional SAPS level – not suitable for use in vehicles equipped with exhaust cleaning system of solid particles filters (DPF).
Turdus SHPD 15W-40 is a high quality mineral engine oil designed for lubrication of heavy-loaded compression-ignition high-power engines with or without turbochargers. It is particularly recommended for standard drain intervals in engines of trucks, farm tractors, buses as well as other high-performance vehicles, if the manufacturer allows the use of this quality and viscosity grade oil.
AGRO
ORLEN OIL AGRO U
Meets requirements
John Deere J20C
High-quality, mineral, hydraulic and gear oil of the UTTO / THF type, intended for the lubrication of the drive train, also with the so-called with wet brakes and as a working fluid in the hydraulic system of tractors and agricultural machines.
ORLEN OIL AGRO U guarantees optimal protection of the surface of the lubricated elements, give high level of anti-foam properties and also high ability to release air.
It ensures the cleanliness of the lubricated systems and protect against wear and ensures the durability of the lubricated parts of the systems.
AGRO
ORLEN OIL AGRO STOU 10W-30
Quality
API: CG-4; API: GL-4; ACEA: E3
Viscosity
SAE 10W-30
Meets requirements
Massey Ferguson M1145, M1144, M1139; Ford M2C 159B, C; John Deere JDM J27; New Holland 82009201, 2, 3; ZF TE –ML 06A ,06B, 06C, 07B; CCMC D4; Sperry Vickers/Eaton: M2950S; Sperry Vickers/Eaton: I-286-S; Sauer Sunstrand/Danfoss: Hydrostatic Trans Fluid; AFNOR NFE68603E
ORLEN OIL Agro STOU 10W-30 is a high quality, multi-purpose (gear, motor, hydraulic) mineral oil.
The unique and modern composition of specially selected mineral bases and additives meets the construction requirements of modern agricultural equipment manufacturers.
The oil guarantees:
• excellent lubricating and anti-wear properties,
• good compatibility with seals,
• system vibration damping,
• high resistance to oxidation,
• compatibility with a variety of sealing materials.
ORLEN OIL Agro STOU 10W-30 is recommended for lubrication of motors, hydraulic systems and manual transmissions in various types of agricultural machinery from different manufacturers. It is suitable for use in wet brake systems.
AGRO
ORLEN OIL AGRO STOU 10W-40
Quality
API: CG-4; API: GL-4; ACEA: E3
Viscosity
SAE 10W-40
Meets requirements
Massey Ferguson M1145, M1144, M1139; Ford M2C 159B, C; John Deere JDM J27; New Holland 82009201, 2, 3; ZF TE –ML 06A ,06B, 06C, 07B; CCMC D4; Sperry Vickers/Eaton: M2950S; Sperry Vickers/Eaton: I-286-S; Sauer Sunstrand/Danfoss: Hydrostatic Trans Fluid; AFNOR NFE68603E; Rekomendacje, Referencje: Farmtrac
Multipurpose multigrade engine, transmission and hydraulic STOU oil (Super Tractor Oil Universal). Ideal oil properties ensure trouble-free operation of transmissions, hydraulic systems and engines in various types of agricultural machinery.
Guarantee:
• excellent lubricating and anti-wear properties;
• good compatibility with sealing materials;
• dampening system vibrations;
• high resistance to oxidation
ORLEN OIL Agro STOU 10W-40 is a multipurpose oil recommended for lubrication of engines, hydraulic systems and manual transmissions of various types and makes of agricultural machinery. Suitable for use in wet brake systems.
AGRO
ORLEN OIL AGRO UTTO 10W-30
Quality
API: GL-4
Viscosity
SAE 10W-30
Meets requirements
John Deere JDM J20C, J20D; Massey Ferguson CMS M1135, M1141, M1143, M1145; Allison C4; AGCO POWERFLUID 821XL; Ford ESN M2C86-B,C; Ford ESN M2C134-D; New Holland 410B, Case New Holland MAT 3540, 3525, 3526, 3509, 3505; Case New Holland 3506; Case MS 1210, 1209, 1207, 1206; FNHA-2-C-200.00; FNHA-2-C-201.00; Volvo CE WB 101; Caterpillar TO-2; Valtra G2-08; Valtra G2-B10; ZF TE-ML 03E, 05F, 06K, 17E, 21F; Same; Landini; Deutz-Fahr; Claas / Renault Agriculture; Fendt; Komatsu; Kubota UDT Fluid; Parker Denison UTTO/THF; Vickers 35VQ25
High quality multipurpose hydraulic and gear oil. Modern, unique composition of especially selected mineral bases and enriching additives allows meeting modern requirements of farming equipment manufacturers.
The oils provide perfect wear and corrosion protection as well as compatibility with various sealing materials.
ORLEN OIL AGRO UTTO 10W-30 is intended for lubricating of various kind gears used in farming equipment (gear boxes, main gears, steering gears, differential gears) and it can be used in highly loaded hydraulic systems, it meets requirements of farming equipment manufacturers. Oil can be used in tractors where manual gear, axles, hydraulic fittings and "wet brakes" are lubricated by one oil system.
AGRO
ORLEN OIL AGRO BASIC STOU 10W-40
Quality
API: CG-4/GL-4; ACEA: E2
Viscosity
SAE 10W-40
Meets requirements
Zetor Proxima, Proxima Plus, Proxima Power, Forterra; John Deere JDM J 27; Massey Ferguson M1139; Massey Ferguson M1144; Massey Ferguson M1145; Ford M2C 159B; Allison C-4; Caterpillar TO-2; ZF TE-ML 06B; ZF TE-ML 06C; ZF TE-ML 07B; Mercedes-Benz 227.1, 228.1, 228.3; MAN 271; MIL-L-2104D; Perkins
Universal, multipurpose engine, gear and hydraulic oil for farming equipment.
ORLEN OIL AGRO BASIC STOU 10W-40 is mainly intended for farming equipment to lubricate engines, gears of various kinds, clutches, it can be used in wet brakes and hydraulic systems. It may be applied in Powershift gearboxes.
AGRO
ORLEN OIL AGRO BASIC STOU 10W-30
Quality
API: CG-4/GL-4; ACEA: E2
Viscosity
SAE 10W-30
Meets requirements
John Deere JDM J 27; Massey Ferguson M1139; Massey Ferguson M1144; Massey Ferguson M1145; Ford M2C 159B; Allison C-4; Caterpillar TO-2; ZF TE-ML 06B; ZF TE-ML 06C; ZF TE-ML 07B; Mercedes-Benz 227.1, 228.1, 228.3; MAN 271; MIL-L-2104D; Perkins
Universal, multipurpose engine, gear and hydraulic oil for farming equipment.
AGRO BASIC STOU 10W-30 is mainly intended for farming equipment to lubricate engines, gears of various kinds, clutches, it can be used in wet brakes and hydraulic systems. It may be applied in Powershift gearboxes.
AGRO
ORLEN OIL AGRO BASIC UTTO 10W-30
Quality
API: GL-4
Viscosity
SAE 10W-30
Meets requirements
Zalecany do stosowania w maszynach rolniczych URSUS; Ford M2C86B; Ford M2C86C; Ford M2C134D; Case New Holland MAT 3525; Case New Holland MAT 3526; John Deere JDM J20C; John Deere JDM J20D; Massey Ferguson CMS M1143; Massey Ferguson CMS M1135; Massey Ferguson CMS M1145; J.I Case MS-1204, 6, 7, 9; Allison C-4; Volvo CE WB 101; Caterpillar TO-2; JCMAS HK P-041; Sperry Vickers/Eaton: M2950S; Sperry Vickers/Eaton: I-286-S; Parker (Dennison UTTO), HF -1, HF-2; Sauer Sunstrand/Danfoss: Hydrostatic Trans Fluid
ORLEN OIL AGRO BASIC UTTO 10W-30 is intended for lubricating of various kind gears used in farming equipment (gear boxes, main gears, steering gears, differential gears) and it can be used in highly loaded hydraulic systems, it meets requirements of farming equipment manufacturers.
Oil can be used in tractors where manual gear, axles, hydraulic fittings and "wet brakes" are lubricated by one oil system. ORLEN OIL AGRO BASIC UTTO 10W-30 is a high quality multipurpose hydraulic and gear oil. Modern, unique composition of especially selected mineral bases and enriching additives allows meeting modern requirements of farming equipment manufacturers. The oils provide perfect wear and corrosion protection as well as compatibility with various sealing materials.
ORLEN OIL
ORLEN OIL SUPEROL F CD 15W-40
Quality
API: CD
Viscosity
SAE 15W-40
ORLEN OIL Superol F CD 15W-40 multigrade engine oil contains selectively refined, solvent-dewaxed and hydrotreated oil distillates obtained from crude oil and a properly selected package of multi-functional enriching additives. It is intended for use in diesel engines of vehicles, machines and aggregates operating in harsh operating conditions, in which it is recommended to use API CD or an earlier oil.
ORLEN OIL
ORLEN OIL SUPEROL M CC 15W-40
Quality
API: CC
Viscosity
SAE 15W-40
Multi-seasonal engine oil provides good lubrication of self-ignition four-stroke engines, provided that it is required to use and the SAE 15W-40 viscosity class with appropriate cleaning and neutralizing properties in the API CC quality class. The oil is not recommended for turbocharged air engines.
General features
• it reduces the wear of engine components,
• it prevents the formation of sludge and carbon deposits,
• it prevents jamming of piston rings,
• it ensures the appropriate potential of dispersing and washing properties,
• it has high dispersing and neutralizing potential TBN ≥8mgKOH / g,
• it shows good oxidation resistance,
• stable oil viscosity during operation.
ORLEN OIL
ORLEN OIL SUPEROL CC 40
Quality
API: CC
Viscosity
SAE 40
One season (summer) diesel engine oil.
ORLEN OIL Superol CC 40 is intended for light supercharged diesel engines of various types working with moderate thermal and mechanical loads.
ORLEN OIL
ORLEN OIL SUPEROL CC 30
Quality
API: CC
Viscosity
SAE 30
One season (summer) diesel engine oil.
ORLEN OIL Superol CC 30 is intended for light supercharged diesel engines of various types working with moderate thermal and mechanical loads.
ORLEN OIL
ORLEN OIL SUPEROL CC 50
Quality
API: CC
Viscosity
SAE 50
Seasonal Superol CC 50 engine oil provides good lubrication of self-ignition four-stroke engines, provided that it is required to use and the SAE 50 viscosity class with appropriate cleaning and neutralizing properties in the API CC quality class. The oil is not recommended for turbocharged air engines.
General features
• it reduces the wear of engine components,
• it prevents the formation of sludge and carbon deposits,
• It prevents jamming of piston rings,
• it ensures the appropriate potential of dispersing and washing properties,
• it has high dispersing and neutralizing potential TBN ≥8mgKOH / g,
• it shows good oxidation resistance,
• stable oil viscosity during operation.
ORLEN OIL
ORLEN OIL SUPEROL CB 30
Quality
API: CB
Viscosity
SAE 30
ORLEN OIL Superol CB 30 reduces wear of engine components, prevents formation of sludge and carbon deposits, prevents piston ring sticking. Provides appropriate dispersant-washing property potential, has a dispersant-washing potential TBN >2.5mgKOH/g. Exhibits good oxidation resistance and stable oil viscosity during operation
Application:
Seasonal Superol CB engine oil provides good lubrication of self-ignition four-stroke engines, provided that it is required to use and the SAE 30W viscosity class with appropriate cleaning and neutralizing properties and the API CB quality class. The oil is not recommended for turbocharged air engines.
ORLEN OIL
ORLEN OIL SUPEROL CB 40
Quality
API: CB
Viscosity
SAE 40
Seasonal ORLEN OILSuperol CB engine oil provides good lubrication of self-ignition four-stroke engines, provided that it is required to use and the SAE 40W viscosity class with appropriate cleaning and neutralizing properties and the API CB quality class. The oil is not recommended for turbocharged air engines.
Characteristics
• it reduces the wear of engine components,
• it prevents the formation of sludge and carbon deposits,
• It prevents jamming of piston rings,
• it ensures the appropriate potential of dispersing and washing properties,
• it has high dispersing and neutralizing potential TBN ≥2,5mgKOH / g,
• it shows good oxidation resistance,
• stable oil viscosity during operation
ORLEN OIL
ORLEN OIL SUPEROL A CB/SC 15W-40
Quality
API: CB/SC
Viscosity
SAE 15W-40
Multigrade, mineral engine oil intended mainly for the lubrication of non-turbocharged diesel engines, vehicles, machines, other stationary and marine engines, for which an oil of API CB / SC quality level and SAE 15W-40 viscosity grade is recommended
General features
• it reduces the wear of engine components
• it prevents the formation of sludge and carbon deposits
• It prevents jamming of piston rings
• it ensures the appropriate potential of dispersing and washing properties
• it has high dispersing and neutralizing potential TBN ≥2,5mgKOH / g
• it shows good oxidation resistance
• stable oil viscosity during operation